cFEA

Finite element analysis in your browser. Bring in a part, mesh it, set the supports and loads, solve, and read the stresses, movements, frequencies or temperatures in 3D, with a report you can issue.

Overview

A cFEA document is a finite element analysis of one solid part. You work through seven steps in order: geometry, material, mesh, supports and loads, run, results, report. Nothing is installed: the solver runs on our servers, and your setup, results and revisions are kept with the project like every other document.

The solver is the open-source code_aster with the Gmsh mesher, and the program is checked against hand calculations: a loaded cantilever, natural frequencies, heat conduction and a plate with a hole.

cFEA: a part meshed and solved, with the stress shown in colour

Key Features

Three analyses

Linear static (stress and movement), modal (natural frequencies and mode shapes, animated) and steady-state thermal (temperature and heat flow).

Your geometry

Upload a STEP or STL file, or start from a box, a cylinder or a plate with a hole. The model is checked and its size, volume and any warnings shown before you mesh.

A checked material library

Every property shows its source and how well it has been verified. A value you type is marked unverified in the report, and Professional mode refuses unchecked values.

A mesh you can see and approve

Quadratic or linear elements, local refinement on faces, in a box or in a sphere, and a quality report. The mesh must be looked at and approved before it can be solved.

Results you can interrogate

Colour plots of displacement and stress with the mesh on or off, nodal or element-by-element values, a tooltip with the value under the pointer, and a warning when the peak stress sits at a support edge.

A report you can issue

A summary, the model, numbered figures and tables, the limits of the analysis and a sign-off block, as a page, a PDF or a Word file, with your own purpose, assumptions and acceptance criteria printed as yours.

Good to Know

  • Free tier: 1 cFEA document and 1 solve a month, like every other document type. Paid plans have no limit.
  • Supports and loads: fixed support, prescribed displacement, pressure, force and gravity; fixed temperature, heat flux and convection.
  • Revisions: a new revision carries the setup over, so you can change one thing and solve again.
  • What it is not: one solid part, linear and elastic. No assemblies or contact, no plasticity, buckling or fatigue, and no design-code check.
  • Checked and honest: the report is stamped as a draft until your checker signs it, and says plainly when results are out of date.
  • Learn more: the Help topic walks through the steps.

Ready to Get Started?

Run your first analysis on a simple shape in a few minutes.

Sign Up Free